CT505 LANforge-FIRE VoIP Call Generator
The CT505 supports SIP VOIP call support,
including RTP data-stream generation. It can make 35 calls to itself
(70 VoIP soft phones) per chassis. The CT505 is excellent for testing
whether or not an existing infrastructure can handle increased VoIP call
load, and can also be used to test SIP gateways and other infrastructure.
The CT505 uses the MAC-VLAN feature in the Candela Linux kernel to allow one
virtual interface per phone, so each phone can use a unique IP address and
use standard SIP protocol ports. Normal LANforge-FIRE traffic generation
features (Ethernet, UDP, TCP, HTTP, etc) is also supported by the CT505 at no
additional charge.
The CT505 1U rackmount chassis fits into a standard rack and is only 14 inches deep. It supports standard
VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system.
The rackmount chassis is relatively noisy, so it is better for a data center deployment than
a desktop environment. Other form factors better suited for traveling or desktop use
are also available at similar prices and performance. More powerful systems are also
available and multiple LANforge systems can be clustered
together into a single managed realm for increased call capacity.
No additional hardware or software is required, but you may wish to
manage the system using the LANforge-GUI on a separate
machine.
Larger Images: front
back
NOTE: This product may have a different hardware
configuration than the system pictured above.
Refer to your official quote for details. |
NOTE: This product may have a different hardware
configuration than the system pictured above.
Refer to your official quote for details. |
Candela Technologies Inc., 2026 Main Street, Suite A, P.O. Box 3285,
Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618
Example Network Diagram
Candela Technologies Inc., 2026 Main Street, Suite A, P.O. Box 3285,
Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618
Quick Start Guide
- Connect Management ethernet port to Management network or management PC. If
connecting directly to a PC, an ethernet cross-over cable should be used.
Or, connect VGA, Keyboard, and Mouse to the chassis and manage it locally.
- Connect one traffic generating port to the downstream side of the device
under test. This usually is considered the 'client' side of the network and
will host most of the virtual interfaces.
- Connect second traffic generating port to the upstream side of the device
under test. Virtual interfaces may also be added here in order to emulate
multiple servers.
- Connect power plug to a standard US or European AC power source.
- If managing remotely, install the LANforge-GUI on a separate management PC or Laptop. Windows and
Linux GUIs are supported: Select the correct one from the CDROM or Candela
Technologies Download page and install it.
- The CT505 should now boot. If DHCP is enabled on the Management network,
the CT505 will automatically acquire an IP address. If DHCP is not available,
the IP address will be set to 192.168.1.101 by the LANforge scripts.
- Start the LANforge-GUI on the management PC, or the CT505 server if managing
locally, and click the 'Discover' button.
It should find the CT505 appliance and add the IP address to the drop-down
box in the Connect widget. Press 'Connect' and you will be connected to
the CT505.
- Select the Layer 3, VOIP/RTP, Layer 4 and other LANforge-FIRE related
tabs in the GUI to see existing traffic connections and to modify them
or add new ones. You can also view a real-time report of the test with the
'Display' button for some traffic types. Any modifications take place
immediately after you click 'Submit'.
Candela Technologies Inc., 2026 Main Street, Suite A, P.O. Box 3285,
Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618
LANforge-FIRE VoIP Call Generator Related Shots
VoIP/RTP Connections
src="images/gui_voip_cx.png">
VoIP Create/Modify Screen
src="images/gui_voip_cx_mod.png">
Candela Technologies Inc., 2026 Main Street, Suite A, P.O. Box 3285,
Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618
Software Features
LANforge VoIP/RTP Call Generator Feature Highlights.
- SIP protocol used for call management.
- SIP over UDP is supported on both Windows and Linux.
- Can use directed mode, where VoIP phones call directly to
themselves.
- Can also use Gateway mode where the VoIP phones register with a SIP
gateway.
- SIP authentication is supported.
- RTP protocol used for streaming media transport, and supports the
following CODECS. More codecs will be supported in the future.
- G.711u: 64 kbps data stream, 50 packets per second.
- Speex: 16 kbps data stream, 50 packets per second, www.speex.org (Linux ONLY).
- G.726-16: 16 kbps data stream, 50 packets per second.
- G.726-24: 24 kbps data stream, 50 packets per second.
- G.726-32: 32 kbps data stream, 50 packets per second.
- G.726-40: 40 kbps data stream, 50 packets per second.
- G.729a: 8 kbps data stream, 50 packets per second.
- NONE: A messaging-only configuration is supported.
- Supports PESQ automated voice quality testing.
- RTCP protocol used for streaming media statistics (SIP only).
- Each LANforge VoIP/RTP endpoint can play from a wav file and record
to a separate wav file. Almost any sound file can be converted to the
correct wav file format with tools bundled with LANforge. Sample voice
files are included.
- Current benchmarks show support for 280 or more
emulated VoIP phones per high-end machine.
- LANforge VoIP/RTP endpoints can call other LANforge endpoints or third party
SIP phones like Cisco and Grandstream. Third party phones can also call
LANforge endpoints and hear the WAV file being played.
Candela Technologies Inc., 2026 Main Street, Suite A, P.O. Box 3285,
Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618
LANforge VoIP/RTP Call Generator Feature Highlights.
- Supports real-world protocols:
- Layer 2: Raw-Ethernet.
- 802.1Q VLANs.
- PPPoE: Integrated PPPoE support.
- Layer 3: IPv4, IPv6, UDP/IP, IGMP Multicast UDP, TCP/IP.
- Layer 4: FTP, HTTP, HTTPS, TFTP, SFTP, SCP
- Layer 4: VOIP Call Generator (SIP, RTP, RTCP).
- Layer 4: TELNET, PING, DNS, SMTP, NMAP (via add-on script).
- File-IO: NFSv3, NFSv4, CIFS, iSCSI.
- Supports up to 1000 concurrent TCP connections with base license package,
and up to 30,000 connection on high-end hardware with additional license
purchase.
- The CT505 is able to support 35 calls and 100Mbps or more of regular
network traffic, depending on protocol mix and speed of the network under test.
The portable chassis configurations may run
at different speeds than the 1U rackmount systems.
- Supports real-world compliance with ARP protocol.
- Supports ToS (QoS) settings for TCP/IP and UDP/IP connections.
- Uses publicly available Linux, Windows and Solaris networking stack for increased standards compliance.
- Utilizes libcurl
for FTP, HTTP and HTTPS (SSL), TFTP and SCP protocols.
- Supports file system test endpoints (NFS, CIFS, and iSCSI file systems, too!).
File system mounts can use the virtual interface feature for advanced testing
of file server applications.
- Supports custom and command-line programs, like telnet, SMTP, and ping.
- Comprehensive traffic reports include: Packet Transmit rate, Packet Receive rate,
Packet Receive Drop %, Transmit Bytes, Receive Bytes, Latency,
various ethernet driver level counters, and much more.
- Supports generation of reports that are ready to be imported into your favorite
spread-sheet.
- Allows packet sniffing and network protocol decoding with the integrated
Wireshark protocol sniffer.
- GUI runs as Java application on Linux, Solaris and Microsoft Operating
Systems (among others).
- GUI can run remotely, even over low-bandwidth links to accommodate the
needs of the users.
- Central management application can manage multiple units, tests, and
testers simultaneously.
- Includes easy built-in scripting for iterating through rates and packet
sizes, with automated reporting. Also supports scriptable command line interface (telnet)
which can be used to automate test
scenarios. Perl libraries and example scripts are provided!
- Comprehensive management information detailing all aspects of the LANforge system
including processor statistics, test cases, and ethernet port statistics.
- Automatic discovery of LANforge data generators simplifies configuration
of LANforge test equipment.
- LANforge traffic generation/management software is supported on
Linux, Solaris and MS Windows.
Candela Technologies Inc., 2026 Main Street, Suite A, P.O. Box 3285,
Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618
Hardware Specification
- Mid-Range 1U rackmount server.
- Operating System: Fedora Linux with customized Linux kernel.
- Up to 6 PCIe Intel Pro/1000 10/100/1000 Ethernet ports.
Additional 10/100/1000 ethernet interface for management.
- High-availability ethernet hardware bypass option available.
- 2.8 GHz or higher Pentium processor.
- One PCIe slot.
- 1 GB or more RAM.
- 40 GB or larger Hard Drive.
- Solid State Drive option available.
- Slim CDROM drive.
- Standard US or European power supply (automatically detects EU v/s US power).
- Weight: 18 lbs or 8.2 kg.
- Dimensions: 17 x 14 x 1.75 inches (14-inch deep 1U rackmount server) Metric:
432 x 356 x 44 mm.
- ROHS compliant.
Feature Upgrades
Unless otherwise noted, these features usually cost extra:
- WanPaths (LANforge-ICE feature set)
- Virtual Interfaces: MAC-VLANs, 802.1Q VLANs, WiFi stations, etc
- FIRE Connections: Base FIRE license includes 1000 active connections.
- LANforge-ICE Network Emulation.
- VOIP: Each concurrent call requires a license.
- Armageddon: Each pair of ports requires a license.
Candela Technologies Inc., 2026 Main Street, Suite A, P.O. Box 3285,
Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618
Last modified: Mon Feb 13 17:40:19 PST 2012
